Проблеми със записвачката

vladimirow · Октомври 20, 2008

Здравейте, отскоро се появи някакъв проблем с моята записвачка - тя е модел HL-DT-ST DVD-RAM

GSA-H55N.Работеше нормално до известно време, после не ми разпознаваше някои от дисковете.Не можеше да

ги трие и ми съобщаваше че тези дискове са празни, въпреки че бяха записани.Преинсталирах

Windowsa.Направих някои настроики от описаните тук във форумите.Сложих двете у-ва да бъдат на DMA if

available.Инсталирах най новата весия на НЕРОТО - 9.Преди това видях че няма ASPI DRIVERS, намерих ги и

ги инсталирах.Записваше нормално до едно време и после пак започна същите изпълнения.И то със чисто нови

дискове - SONY DVD+RW, Maxell DVD+RW.Бях инсталирал преди НЕРОТО - CDBurnerXP, при нея беше същото -

сложа диска, пусна го да записва и в същия момент излиза от у-вото.Иначе когато сложа Boot disk на

Windows го стартира без проблеми.Имам и една друга записвачка - CD-RW.Тук по надолу качвам LOG фаилове

на различни записи - ако някои може да помогне със съвети за тези проблеми.Операционната ми с-ма е Windows XP, серв.пак 3.Прочетох почти всичко по форума тук и на други места, но така и не можах да разбера причината.Моля за помощ.

Как и къде да кача изображенията, т.е. LOG фаилове на записването?

Night_Raven · Октомври 20, 2008

Какви точно проблеми има устройството? Какви дискове чете и какви не чете, какви дискове записва и какви не записва? CD-RW устройството справя ли се успешно? Фърмуеърт обновен ли е до последната версия?

Съдържанието на LOG файловете можеш да го пуснеш директно във форума или да прикачиш текстов(и) файл(ове) към коментара си.

ASPI драйвери общо взето не са нужни.

vladimirow · Октомври 20, 2008

Windows XP 5.1

IA32

WinAspi: -

NT-SPTI used

Nero Version: 9.0.9.100

Internal Version: 9, 0, 9, 100

(Nero Express)

Recorder: <HL-DT-ST DVD-RAM GSA-H55N>Version: 1.02 - HA 1 TA 0 - 9.0.9.100

Adapter driver: <IDE> HA 1

Drive buffer : 2048kB

Bus Type : default

CD-ROM: <HL-DT-ST DVD-RAM GSA-H55N>Version: 1.02 - HA 1 TA 0 - 9.0.9.100

Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===

DiskPeripheral : WDC WD800BB-00DKA0 atapi Port 0 ID 0 DMA: On

DiskPeripheral : WDC WD1600AAJB-00PVA0 atapi Port 0 ID 1 DMA: On

CdRomPeripheral : HL-DT-ST DVD-RAM GSA-H55N atapi Port 1 ID 0 DMA: On

CdRomPeripheral : HL-DT-ST CD-RW GCE-8525B atapi Port 1 ID 1 DMA: On

=== CDRom-Device-Map ===

HL-DT-ST DVD-RAM GSA-H55N E: CdRom0

HL-DT-ST CD-RW GCE-8525B F: CdRom1

=======================

AutoRun : 1

Excluded drive IDs:

WriteBufferSize: 83886080 (0) Byte

BUFE : 0

Physical memory : 1023MB (1048048kB)

Free physical memory: 609MB (624056kB)

Memory in use : 40 %

Uncached PFiles: 0x0

Use Inquiry : 1

Global Bus Type: default (0)

Check supported media : Disabled (0)

19.10.2008

ISO compilation

20:51:39 #1 Text 0 File SCSIPTICommands.cpp, Line 450

LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

20:51:39 #2 Text 0 File Isodoc.cpp, Line 6789

Iso document burn settings

------------------------------------------

Determine maximum speed : FALSE

Simulate : FALSE

Write : TRUE

Finalize CD : FALSE

Multisession : TRUE

Multisession type: : Start multisession

Burning mode : DAO

Mode : 1

ISO Level : 1 (Max. of 11 = 8 + 3 char)

Character set : ISO 9660

Joliet : TRUE

Allow pathdepth more than 8 directories : TRUE

Allow more than 255 characters in path : TRUE

Write ISO9660 ;1 file extensions : TRUE

20:51:39 #3 ISO9660GEN -11 File Geniso.cpp, Line 3349

First writeable address = 0 (0x00000000)

20:51:39 #4 SPTI -1080 File SCSIPassThrough.cpp, Line 215

CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1080)

CDB Data: 0x51 00 00 00 00 00 00 00 20 00 00 00

Sense Key: 0x02 (KEY_NOT_READY)

Sense Code: 0x3A

Sense Qual: 0x00

Sense Area: 0x70 00 02 00 00 00 00 0E 00 00 00 00 3A

Buffer x04a126c0: Len x20

20:51:39 #5 SPTI -1080 File SCSIPassThrough.cpp, Line 215

CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1080)

CDB Data: 0x51 00 00 00 00 00 00 00 20 00 00 00

Sense Key: 0x02 (KEY_NOT_READY)

Sense Code: 0x3A

Sense Qual: 0x00

Sense Area: 0x70 00 02 00 00 00 00 0E 00 00 00 00 3A

Buffer x04a126c0: Len x20

20:51:39 #6 SPTI -1080 File SCSIPassThrough.cpp, Line 215

CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1080)

CDB Data: 0x52 01 00 00 00 FF 00 00 20 00 00 00

Sense Key: 0x02 (KEY_NOT_READY)

Sense Code: 0x3A

Sense Qual: 0x00

Sense Area: 0x70 00 02 00 00 00 00 0E 00 00 00 00 3A

Buffer x04a126c0: Len x20

20:51:39 #7 SPTI -1080 File SCSIPassThrough.cpp, Line 215

CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1080)

CDB Data: 0x51 00 00 00 00 00 00 00 20 00 00 00

Sense Key: 0x02 (KEY_NOT_READY)

Sense Code: 0x3A

Sense Qual: 0x00

Sense Area: 0x70 00 02 00 00 00 00 0E 00 00 00 00 3A

Buffer x04a126c0: Len x20

20:51:39 #8 SPTI -1080 File SCSIPassThrough.cpp, Line 215

CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1080)

CDB Data: 0x52 01 00 00 00 FF 00 00 20 00 00 00

Sense Key: 0x02 (KEY_NOT_READY)

Sense Code: 0x3A

Sense Qual: 0x00

Sense Area: 0x70 00 02 00 00 00 00 0E 00 00 00 00 3A

Buffer x04a126c0: Len x20

20:51:39 #9 Text 0 File Burncd.cpp, Line 3563

Turn on Disc-At-Once, using DVD media

20:51:39 #10 SPTI -1080 File SCSIPassThrough.cpp, Line 215

CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1080)

CDB Data: 0x51 00 00 00 00 00 00 00 20 00 00 00

Sense Key: 0x02 (KEY_NOT_READY)

Sense Code: 0x3A

Sense Qual: 0x00

Sense Area: 0x70 00 02 00 00 00 00 0E 00 00 00 00 3A

Buffer x04a126c0: Len x20

20:51:39 #11 SPTI -1080 File SCSIPassThrough.cpp, Line 215

CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1080)

CDB Data: 0x51 00 00 00 00 00 00 00 20 00 00 00

Sense Key: 0x02 (KEY_NOT_READY)

Sense Code: 0x3A

Sense Qual: 0x00

Sense Area: 0x70 00 02 00 00 00 00 0E 00 00 00 00 3A

Buffer x04a126c0: Len x20

20:51:39 #12 SPTI -1080 File SCSIPassThrough.cpp, Line 215

CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1080)

CDB Data: 0x52 01 00 00 00 FF 00 00 20 00 00 00

Sense Key: 0x02 (KEY_NOT_READY)

Sense Code: 0x3A

Sense Qual: 0x00

Sense Area: 0x70 00 02 00 00 00 00 0E 00 00 00 00 3A

Buffer x04a126c0: Len x20

20:51:39 #13 SPTI -1080 File SCSIPassThrough.cpp, Line 215

CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1080)

CDB Data: 0x51 00 00 00 00 00 00 00 20 00 00 00

Sense Key: 0x02 (KEY_NOT_READY)

Sense Code: 0x3A

Sense Qual: 0x00

Sense Area: 0x70 00 02 00 00 00 00 0E 00 00 00 00 3A

Buffer x04a126c0: Len x20

20:51:39 #14 SPTI -1080 File SCSIPassThrough.cpp, Line 215

CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1080)

CDB Data: 0x52 01 00 00 00 FF 00 00 20 00 00 00

Sense Key: 0x02 (KEY_NOT_READY)

Sense Code: 0x3A

Sense Qual: 0x00

Sense Area: 0x70 00 02 00 00 00 00 0E 00 00 00 00 3A

Buffer x04a126c0: Len x20

20:51:55 #15 Phase 40 File dlgbrnst.cpp, Line 1767

Aborted by user

20:51:55 #16 Text 0 File DlgWaitCD.cpp, Line 324

Write in overburning mode: NO (enabled: CD DVD)

20:51:55 #17 Text 0 File DlgWaitCD.cpp, Line 2951

Recorder: HL-DT-ST DVD-RAM GSA-H55N;

CD type reading failed

ATIP Data: ?

20:51:55 #18 Text 0 File DlgWaitCD.cpp, Line 499

>>> Protocol of DlgWaitCD activities: <<<

=========================================

Insert the disc to write to.

(Medium in drive: Unknown. Medium required by compilation: DVD R/RW; DVD DL; DVD-RAM.)

20:51:55 #19 Text 0 File SCSIPTICommands.cpp, Line 450

UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

Existing drivers:

Registry Keys:

HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

Това е единият LOG фаил когато записах 1 диск и тои излезе сам от у-то

Night_Raven · Октомври 20, 2008

Хубаво си дал LOG, но не виждам отговор на останалите въпроси.

vladimirow · Октомври 20, 2008

ТОВА Е ДРУГ LOG фаил КОГАТО ЗАПИСАХ ЦЯЛ ДИСК

Windows XP 5.1

IA32

WinAspi: -

NT-SPTI used

Nero Version: 9.0.9.100

Internal Version: 9, 0, 9, 100

(Nero Express)

Recorder: <HL-DT-ST DVD-RAM GSA-H55N>Version: 1.02 - HA 1 TA 0 - 9.0.9.100

Adapter driver: <IDE> HA 1

Drive buffer : 2048kB

Bus Type : default

CD-ROM: <HL-DT-ST DVD-RAM GSA-H55N>Version: 1.02 - HA 1 TA 0 - 9.0.9.100

Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===

DiskPeripheral : WDC WD800BB-00DKA0 atapi Port 0 ID 0 DMA: On

DiskPeripheral : WDC WD1600AAJB-00PVA0 atapi Port 0 ID 1 DMA: On

CdRomPeripheral : HL-DT-ST DVD-RAM GSA-H55N atapi Port 1 ID 0 DMA: On

CdRomPeripheral : HL-DT-ST CD-RW GCE-8525B atapi Port 1 ID 1 DMA: On

=== CDRom-Device-Map ===

HL-DT-ST DVD-RAM GSA-H55N E: CdRom0

HL-DT-ST CD-RW GCE-8525B F: CdRom1

=======================

AutoRun : 1

Excluded drive IDs:

WriteBufferSize: 83886080 (0) Byte

BUFE : 0

Physical memory : 1023MB (1048048kB)

Free physical memory: 651MB (666784kB)

Memory in use : 36 %

Uncached PFiles: 0x0

Use Inquiry : 1

Global Bus Type: default (0)

Check supported media : Disabled (0)

19.10.2008

UDF compilation

21:42:22 #1 Text 0 File SCSIPTICommands.cpp, Line 450

LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

21:42:22 #2 Text 0 File Isodoc.cpp, Line 6789

UDF document burn settings

------------------------------------------

Determine maximum speed : FALSE

Simulate : FALSE

Write : TRUE

Finalize CD : FALSE

Multisession : TRUE

Multisession type: : Start multisession

Burning mode : DAO

Mode : 1

UDF Mode : pure

UDF Options : automatic

UDF Revision : 1.02

UDF Partition Type : physical

21:42:23 #3 Text 0 File Burncd.cpp, Line 3563

Turn on Disc-At-Once, using DVD media

21:42:23 #4 Text 0 File FilesystemSettingsValidator.cpp, Line 142

FS Settings: using validator 'CUDFSettingsValidatorDVD'

ParamMode = 'automatic', changing UDF partition type from 'physical' to 'physical'

Changing UDF revision from '1.02' to '1.02'

21:42:23 #5 Text 0 File DlgWaitCD.cpp, Line 312

Last possible write address on media: 2295103 (510:01.28, 4482MB)

Last address to be written: 2202383 (489:25.08, 4301MB)

21:42:23 #6 Text 0 File DlgWaitCD.cpp, Line 324

Write in overburning mode: NO (enabled: CD DVD)

21:42:23 #7 Text 0 File DlgWaitCD.cpp, Line 2951

Recorder: HL-DT-ST DVD-RAM GSA-H55N, Media type: DVD+RW

Disc Manufacturer ID: <PHILIPS>, Media Type ID: <041>, Product revision number: 0

Disc Application Code: 0, Extended Information Indicators: 1

21:42:23 #8 Text 0 File DlgWaitCD.cpp, Line 499

>>> Protocol of DlgWaitCD activities: <<<

=========================================

21:42:23 #9 Text 0 File ThreadedTransferInterface.cpp, Line 756

Setup items (after recorder preparation)

0: TRM_DATA_MODE1 ()

2 indices, index0 (150) not provided

original disc pos #0 + 2202384 (2202384) = #2202384/489:25.9

relocatable, disc pos for caching/writing not required/ required

-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2202384 blocks [E: HL-DT-ST DVD-RAM GSA-H55N]

--------------------------------------------------------------

21:42:23 #10 Text 0 File ThreadedTransferInterface.cpp, Line 958

Prepare [E: HL-DT-ST DVD-RAM GSA-H55N] for write in CUE-sheet-DAO

DAO infos:

==========

MCN: ""

TOCType: 0x00; Session Closed, disc not fixated

Tracks 1 to 1: Idx 0 Idx 1 Next Trk

1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4510482432, ISRC ""

DAO layout:

===========

0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00

0 | 1 | 0 | 0x41 | 0 | 0 | 0x00

0 | 1 | 1 | 0x41 | 2202384 | 0 | 0x00

2202384 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

21:42:26 #11 Text 0 File SCSIPTICommands.cpp, Line 240

SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

21:42:26 #12 Text 0 File Burncd.cpp, Line 4362

Caching options: cache CDRom or Network-Yes, small files-Yes (<64KB)

21:42:26 #13 Phase 24 File dlgbrnst.cpp, Line 1767

Caching of files started

21:42:27 #14 Text 0 File Burncd.cpp, Line 4484

Cache writing successful.

21:42:27 #15 Phase 25 File dlgbrnst.cpp, Line 1767

Caching of files completed

21:42:27 #16 Phase 36 File dlgbrnst.cpp, Line 1767

Burn process started at 4x (5 540 KB/s)

21:42:27 #17 Text 0 File ThreadedTransferInterface.cpp, Line 2675

Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

21:42:27 #18 Text 0 File Cdrdrv.cpp, Line 10187

---- Disc Structure: Physical Format Information (00h) ----

Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050

Book Type: DVD+RW (9), Part Version: 1.1x (2)

Disc Size: 120 mm, Maximum Transfer Rate: <not specified> (F h)

Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable

Linear Density: 0,267 um/bit, Track Density: 0,74 um/track

Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)

End Physical Sector Number of Data Area: 26053F h

Data in Burst Cutting Area (BCA) does not exist

Disc Application Code: 0 / 0 h

Extended Information indicators: 1 h

Disc Manufacturer ID: PHILIPS.

Media type ID: 041

Product revision number: 0

Number of Physical format information bytes in use in ADIP up to byte 63: 57

Media Specific [16..783]:

00 00 01 50 48 49 4C 49 - 50 53 00 30 34 31 00 39 ...PHILIPS.041.9

23 00 9F 7C 5C 02 28 00 - 9A 7E 70 02 28 00 A0 7B #..|\.(..~p.(..{

68 02 28 04 04 20 E0 00 - F0 00 00 00 00 00 00 00 h.(.............

01 00 17 38 00 28 8B 46 - 02 2C 00 2E 8A 3A 02 2C ...8.(.F.,...:.,

00 2C 8C 3C 02 2C 28 35 - 50 00 20 00 40 20 00 00 .,.<.,(5P...@...

00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

21:42:27 #19 Text 0 File DVDR.cpp, Line 6632

Drive: HL-DT-ST DVD-RAM GSA-H55N

Book Type request [LG]: DVD-ROM

Book Type setting not supported for the loaded disc type

21:42:27 #20 Phase 98 File dlgbrnst.cpp, Line 1767

Start formatting disc before burning

21:43:06 #21 Phase 100 File dlgbrnst.cpp, Line 1767

Formatting disc was successful

21:43:06 #22 Text 0 File DVDPlusRW.cpp, Line 675

Start write address at LBA 0

DVD high compatibility mode: Yes

21:43:06 #23 Text 0 File ThreadedTransfer.cpp, Line 273

Pipe memory size 83836800

21:43:06 #24 Text 0 File CUDFTransferItem2.cpp, Line 660

GenUDF2 FS Layout:

=-=-=-=-=-=-=-=-=-=-

Sectors to be written: 2202384

Session Start: Sector 0

Volume Structure: Sector [0, 256] (257 Sectors)

Meta Data: Sector [257, 285] (29 Sectors)

Data: Sector [286, 2202081] (2201796 Sectors)

After Data: Sector [2202082, 2202095] (14 Sectors)

Trailer Track: Sector [2202096, 2202383] (288 Sectors)

GenUDF2 Parameters:

=-=-=-=-=-=-=-=-=-=-

PrepTime: 10-19-2008 21:42:23

UDF Revision: 1.02

UDF Partition Type: Physical

UDF Special Mode: None

Bytes per Sector: 2048

Session Start: 0

Physical Partition Start: -1

Total Capacity: 2295104

Multi Session Mode: Begin

Disc Type: DVD+RW

OS Class: 0

Volume ID: My Disc

Allow Unicode Labels: 0

Duplicate Meta Data: 1

MS Info File: 04A31238

VMS Rollback File: 00000000

Create ISO bridge: 0

ECC Block Length: 16

Sparing Packet Length: 32

Allocation Unit Size: 32

Alignment Unit Size: 16

Make Writable: 0

Access Type: Read-only

21:56:40 #25 Text 0 File WriterStatus.cpp, Line 245

<E: HL-DT-ST DVD-RAM GSA-H55N> start writing Lead-Out at LBA 2202384 (219B10h), length 0 blocks

21:56:41 #26 Text 0 File DVDPlusRW.cpp, Line 900

Media-Format will be stopped after burning

21:56:41 #27 Phase 127 File dlgbrnst.cpp, Line 1767

Generating DVD high compatibility borders

21:57:35 #28 Text 0 File DVDPlusRW.cpp, Line 943

EndDAO: Last written address 2202384

21:57:35 #29 Text 0 File DVDPlusDualLayer.cpp, Line 1424

SetDriveCaps: Set LAST LBA of layer 1 to 0

21:57:35 #30 Phase 37 File dlgbrnst.cpp, Line 1767

Burn process completed successfully at 4x (5 540 KB/s)

21:57:35 #31 Phase 78 File dlgbrnst.cpp, Line 1767

Data verification started

21:57:38 #32 Text 0 File ThreadedTransfer.cpp, Line 273

Pipe memory size 590400

21:57:38 #33 Text 0 File CUDFTransferItem2.cpp, Line 660

GenUDF2 FS Layout:

=-=-=-=-=-=-=-=-=-=-

Sectors to be written: 2202384

Session Start: Sector 0

Volume Structure: Sector [0, 256] (257 Sectors)

Meta Data: Sector [257, 285] (29 Sectors)

Data: Sector [286, 2202081] (2201796 Sectors)

After Data: Sector [2202082, 2202095] (14 Sectors)

Trailer Track: Sector [2202096, 2202383] (288 Sectors)

GenUDF2 Parameters:

=-=-=-=-=-=-=-=-=-=-

PrepTime: 10-19-2008 21:42:23

UDF Revision: 1.02

UDF Partition Type: Physical

UDF Special Mode: None

Bytes per Sector: 2048

Session Start: 0

Physical Partition Start: -1

Total Capacity: 2295104

Multi Session Mode: Begin

Disc Type: DVD+RW

OS Class: 0

Volume ID: My Disc

Allow Unicode Labels: 0

Duplicate Meta Data: 1

MS Info File: 04A31238

VMS Rollback File: 00000000

Create ISO bridge: 0

ECC Block Length: 16

Sparing Packet Length: 32

Allocation Unit Size: 32

Alignment Unit Size: 16

Make Writable: 0

Access Type: Read-only

22:10:22 #34 Phase 80 File dlgbrnst.cpp, Line 1767

Data verification completed successfully

22:10:26 #35 Text 0 File SCSIPTICommands.cpp, Line 287

SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

22:10:32 #36 Text 0 File Cdrdrv.cpp, Line 11444

DriveLocker: UnLockVolume completed

22:10:32 #37 Text 0 File SCSIPTICommands.cpp, Line 450

UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

Existing drivers:

Registry Keys:

HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

Фърмуеърт не е обновен защото не знам как, а и да не я повредя засега без напътствия...

Чете всички дискове - DVD-R, вече записани - BENQ DVD-R, hp DVD-R I DVD+R, но 1 SONY DVD+RW които купих същия ден и записах върху него 1 филм след това започна да го вади от у-то при опит за запис.От горните дискове имам наи много.Също така чете и CD дискове - например Verbatim ТОЗИ НА КОИТО МИ Е ВИНДОВСА И ДРУГИ.

CD-RW устройството справя ли се успешно? - НЕ.Не бях го ползвал 1 година и при първото запиосване ми изяде 1 диск - модел HL-DT-ST CD-RW GCE-8525B

Night_Raven · Октомври 20, 2008

Желателно е да обновиш фърмуеърите на устройствата до последните им версии. Особено на DVD записвачката. Не мога да дам максимално точни и конкретни инструкции, защото нямам устройства на LG, а единият фърмуеър не иска да се стартира, ако не засече съответното устройство. И все пак мога да дам насоки.

За CD-RW устройството:

1) изтегли и разархивирай GCE-8525B 1.04;

2) спри всички допълнителни програми и процеси, за да останат само най-важните като антивирусна, защитна стена и подобни;

3) увери се, че в устройството няма диск и че шейната му е прибрани;

4) стартирай GCE-8525B104(W).exe;

5) според LG обновяването трябва да започне автоматично, но ако не започне, от падащото меню избери съответното устройство (ако не е вече избрано) и кликни бутон Upgrade;

6) ако иска някакви потвърждения дали да потвърди, съгласи се;

7) изчакай да приключи флашването;

8) след като приключи флашването ще е нужен рестарт на системата, така че ако флашерът попита дали да рестартира, се съгласи; ако не попита за рестарт, рестартирай ръчно;

9) готово.

За DVD-RW устройството:

1) изтегли и разархивирай GSA-H55N 1.05;

2) спри всички допълнителни програми и процеси, за да останат само най-важните като антивирусна, защитна стена и подобни;

3) увери се, че в устройството няма диск и че шейната му е прибрани;

4) стартирай GSA-H55N_1.05.exe;

5) кликни бутон Update и потвърди на евентуални въпроси дали си сигурен, че искаш да обновиш фърмуеъра;

6) изчакай да приключи флашването;

7) след като приключи флашването ще е нужен рестарт на системата, така че ако флашерът попита дали да рестартира, се съгласи; ако не попита за рестарт, рестартирай ръчно;

8) готово.

Докато тече флашване не прави нищо на компютъра и не спирай захранването му. Не прави 2 флашвания наведнъж, а едно по едно.

vladimirow · Октомври 20, 2008

В момента сам на работа, като се върна ще пиша какво е станало.Както казах след преинсталацията бях инсталирал Daemon Tools, но го разкарах моментално.Почистих рег. от него с една малка програма - ЕВЕНТУАЛНО АКО Е ОСТАНАЛА СЛЕДА ОТ ДРАЙВЕРА - SPTD 1.55, ПОНЕЖЕ ТОЙ НЕ СЕ ДЕИНСТАЛИРА КАКТО ТРЯБВА.След това с тази програмка - XP_CD-DVD-Fix, почистих реда от регистратурата, отговорен за файловите филтри на устройствата.После видях че едната записвачка CD-RW беше на PIO only и я нагласих на DMA.После почистих и двете у-ва с почистващи дискове поотделно. И така работеше нормално до този момент.

Night_Raven · Октомври 20, 2008

Преди да флашнеш фърмуеърите можеш да деинсталираш IDE контролера:

Start -> Run -> devmgmt.msc -> OK -> двоен клик върху IDE ATA/ATAPI controllers -> кликаш с десния бутон върху IDE контролера (името му може да е различно от Standard Dual Channel PCI IDE controller, ако имаш различни драйвери за него от тези на Microsoft), избираш Uninstall и потвърждаваш с OK, след което рестартираш компютъра. Това ще накара системата да инсталира наново IDE устройствата и евентуално ще оправи проблеми с PIO режима.

vladimirow · Октомври 20, 2008

Появи се проблем с обновяването на фърмуеъра за DVD записвачката - изписа ми следното нещо,,Valid ATAPI device can not be found!!! F/M model is DVD RAM GSA H55N,, - OK... Иначе инсталацията на другото у-во {CD-RW} мина без проблем. http://prikachi.com/users/val67/1Z.jpg

Ето и едни други снимки от драйвърити който са инсталирани в момента - може да помогнат: http://prikachi.com/users/val67/2q.jpg,

http://prikachi.com/users/val67/3D.jpg

Сега ще пробвам един запис на CD-RW записвачката да видя какво ще стане и ще ти публикувам резултата

Записа се провали за съжаление - http://prikachi.com/files/410617m.jpg

http://prikachi.com/files/410617m.jpg

Ще кача и 1 LOG файл

Ето и файла:

Windows XP 5.1

IA32

WinAspi: -

NT-SPTI used

Nero Version: 9.0.9.100

Internal Version: 9, 0, 9, 100

(Nero Express)

Recorder: <HL-DT-ST CD-RW GCE-8525B>Version: 1.04 - HA 1 TA 0 - 9.0.9.100

Adapter driver: <IDE> HA 1

Drive buffer : 2048kB

Bus Type : default

CD-ROM: <HL-DT-ST CD-RW GCE-8525B >Version: 1.04 - HA 1 TA 0 - 9.0.9.100

Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===

DiskPeripheral : WDC WD800BB-00DKA0 atapi Port 0 ID 0 DMA: On

DiskPeripheral : WDC WD1600AAJB-00PVA0 atapi Port 0 ID 1 DMA: On

CdRomPeripheral : HL-DT-ST DVD-RAM GSA-H55N atapi Port 1 ID 0 DMA: On

CdRomPeripheral : HL-DT-ST CD-RW GCE-8525B atapi Port 1 ID 1 DMA: On

=== CDRom-Device-Map ===

HL-DT-ST CD-RW GCE-8525B E: CdRom0

=======================

AutoRun : 1

Excluded drive IDs:

WriteBufferSize: 83886080 (0) Byte

BUFE : 0

Physical memory : 1023MB (1048048kB)

Free physical memory: 608MB (623184kB)

Memory in use : 40 %

Uncached PFiles: 0x0

Use Inquiry : 1

Global Bus Type: default (0)

Check supported media : Disabled (0)

20.10.2008

CD-ROM (ISO)

21:38:59 #1 Text 0 File SCSIPTICommands.cpp, Line 450

LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

21:38:59 #2 Text 0 File Isodoc.cpp, Line 6789

Iso document burn settings

------------------------------------------

Determine maximum speed : FALSE

Simulate : FALSE

Write : TRUE

Finalize CD : FALSE

Multisession : TRUE

Multisession type: : Start multisession

Burning mode : TAO

Mode : 1

ISO Level : 1 (Max. of 11 = 8 + 3 char)

Character set : ISO 9660

Joliet : TRUE

Allow pathdepth more than 8 directories : TRUE

Allow more than 255 characters in path : TRUE

Write ISO9660 ;1 file extensions : TRUE

21:38:59 #3 Text 0 File Burncd.cpp, Line 3233

HL-DT-ST CD-RW GCE-8525B

Buffer underrun protection activated

21:38:59 #4 ISO9660GEN -11 File Geniso.cpp, Line 3349

First writeable address = 0 (0x00000000)

21:38:59 #5 Text 0 File ThreadedTransferInterface.cpp, Line 1029

Removed 2 run-out blocks from end of track 0. Length: 358494 -> 358492.

21:38:59 #6 Text 0 File Burncd.cpp, Line 3563

Turn on Track-At-Once, using CD-R/RW media

21:38:59 #7 Text 0 File ThreadedTransferInterface.cpp, Line 1029

Removed 2 run-out blocks from end of track 1. Length: 358494 -> 358492.

21:38:59 #8 Text 0 File FilesystemSettingsValidator.cpp, Line 142

FS Settings: using validator 'CUDFSettingsValidatorCD'

ParamMode = 'automatic', changing UDF partition type from 'physical' to 'physical'

Changing UDF revision from '1.02' to '1.02'

21:38:59 #9 Text 0 File ThreadedTransferInterface.cpp, Line 1029

Removed 2 run-out blocks from end of track 1. Length: 358494 -> 358492.

21:38:59 #10 Text 0 File DlgWaitCD.cpp, Line 312

Last possible write address on media: 359847 ( 79:59.72)

Last address to be written: 358493 ( 79:41.68)

21:38:59 #11 Text 0 File DlgWaitCD.cpp, Line 324

Write in overburning mode: NO (enabled: CD DVD)

21:38:59 #12 Text 0 File DlgWaitCD.cpp, Line 2951

Recorder: HL-DT-ST CD-RW GCE-8525B;

CDR code: 00 97 34 23; OSJ entry from: Mitsubishi Chemical

ATIP Data:

Special Info [hex] 1: C0 00 98, 2: 61 22 17 (LI 97:34.23), 3: 4F 3B 49 (LO 79:59.73)

Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid)

21:38:59 #13 Text 0 File DlgWaitCD.cpp, Line 499

>>> Protocol of DlgWaitCD activities: <<<

=========================================

21:38:59 #14 Text 0 File ThreadedTransferInterface.cpp, Line 756

Setup items (after recorder preparation)

0: TRM_DATA_MODE1 ()

2 indices, index0 (150) not provided

original disc pos #0 + 358494 (358494) = #358494/79:39.69

relocatable, disc pos for caching/writing not required/ required

-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 358492 blocks [E: HL-DT-ST CD-RW GCE-8525B]

--------------------------------------------------------------

21:38:59 #15 Text 0 File ThreadedTransferInterface.cpp, Line 958

Prepare [E: HL-DT-ST CD-RW GCE-8525B] for write in TAO

DAO infos:

==========

MCN: ""

TOCType: 0x00; Session Closed, disc not fixated

Tracks 1 to 1: Idx 0 Idx 1 Next Trk

1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 734502912, ISRC ""

DAO layout:

===========

-150 | lead-in | 0 | 0x41 | 0 | 0 | 0x00

-150 | 1 | 0 | 0x41 | 0 | 0 | 0x00

0 | 1 | 1 | 0x41 | 358494 | 0 | 0x00

358494 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

21:38:59 #16 Text 0 File ThreadedTransferInterface.cpp, Line 1029

Removed 2 run-out blocks from end of track 1. Length: 358494 -> 358492.

21:39:00 #17 Text 0 File SCSIPTICommands.cpp, Line 240

SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

21:39:00 #18 Text 0 File Burncd.cpp, Line 4362

Caching options: cache CDRom or Network-Yes, small files-No (<64KB)

21:39:00 #19 Phase 24 File dlgbrnst.cpp, Line 1767

Caching of files started

21:39:00 #20 Text 0 File Burncd.cpp, Line 4484

Cache writing successful.

21:39:00 #21 Phase 25 File dlgbrnst.cpp, Line 1767

Caching of files completed

21:39:00 #22 Phase 36 File dlgbrnst.cpp, Line 1767

Burn process started at 24x (3 600 KB/s)

21:39:00 #23 Text 0 File ThreadedTransferInterface.cpp, Line 2675

Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

21:39:00 #24 Text 0 File MMC.cpp, Line 22511

Set BUFE: Buffer underrun protection -> ON

21:39:00 #25 Text 0 File ThreadedTransfer.cpp, Line 273

Pipe memory size 83836800

21:41:02 #26 SPTI -1135 File SCSIPassThrough.cpp, Line 215

CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)

CDB Data: 0x2A 00 00 02 04 E0 00 00 20 00 00 00

Sense Key: 0x03 (KEY_MEDIUM_ERROR)

Sense Code: 0x0C

Sense Qual: 0x00

Sense Area: 0x71 00 03 00 00 00 00 0A 00 00 00 00 0C

Buffer x0a724b80: Len x10000

0x15 77 C0 60 6B 70 1E 74 30 30 64 63 CA 16 00 00

0x00 00 01 B6 51 60 32 D0 1E 93 B3 90 7E 3D 20 26

0x16 FA E3 C9 77 BC 9D 20 7B C4 B8 3F 57 99 7B 09

21:41:02 #27 CDR -1135 File Writer.cpp, Line 306

Write error

E: HL-DT-ST CD-RW GCE-8525B

21:41:02 #28 CDR -201 File WriterStatus.cpp, Line 325

Invalid write state

E: HL-DT-ST CD-RW GCE-8525B

21:41:02 #29 TRANSFER -18 File WriterStatus.cpp, Line 325

Could not perform EndTrack

21:41:02 #30 Text 0 File MMC.cpp, Line 17309

<HL-DT-STCD-RW GCE-8525B > start Close Track #2

21:41:28 #31 Phase 38 File dlgbrnst.cpp, Line 1767

Burn process failed at 24x (3 600 KB/s)

21:41:29 #32 Text 0 File SCSIPTICommands.cpp, Line 287

SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

21:41:34 #33 Text 0 File Cdrdrv.cpp, Line 11444

DriveLocker: UnLockVolume completed

21:41:34 #34 Text 0 File SCSIPTICommands.cpp, Line 450

UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

Existing drivers:

Registry Keys:

HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

Log_________________________________________________CD_RW.txt

Night_Raven · Октомври 20, 2008

DVD записвачката пробвай да я флашнеш с LG GSA-H55N 1.03 (885KB), да видим дали ще стане с тази версия.

Пробвай и да запишеш диска с ImgBurn и дай и от нея LOG (че LOG-овете на Nero ми докарват нервна криза), след като записът приключи и ако е неуспешен: View -> Log -> Ctrl+A -> Ctrl+C и пействаш тук. Ако случайно не можеш да се ориентираш в програмата, в тази тема има ръководство за нея.

vladimirow · Октомври 21, 2008

Здравей, Night Raven.

Това ще стане довечера след работа - за флашването.Тогава и ще дам LOG от IMGBurn.A също така и от Everest, ако трябва - някоя програма може да създава конфликт.CD-RW е на около 4 год., а DVD-RW на 1 год.

Night_Raven · Октомври 21, 2008

LOG от EVEREST не е нужен.

vladimirow · Октомври 21, 2008

И с този файл не става - за обновяването на Firmware.Инсталирах ImgBurn, след малко ще пусна един диск да видя какво ще стане и ще ти публикувам резултата.

vladimirow · Октомври 21, 2008

Сложих 1 диск но мисля че не стана добре както ще видиш - ето файла.Утре пак ще опитам.Обнових фърмуера с последния който даде преди това

I 21:32:07 ImgBurn Version 2.4.2.0 started!

I 21:32:07 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3)

I 21:32:07 Total Physical Memory: 1 048 048 KB - Available: 692 788 KB

I 21:32:07 Initialising SPTI...

I 21:32:07 Searching for SCSI / ATAPI devices...

I 21:32:08 Found 1 CD-RW and 1 DVD±RW/RAM!

I 21:35:20 Operation Started!

I 21:35:20 Building Image Tree...

I 21:35:29 Checking Directory Depth...

I 21:35:29 Calculating Totals...

I 21:35:29 Preparing Image...

I 21:35:29 Checking Path Length...

I 21:35:29 Contents: 42 Files, 2 Folders

I 21:35:29 Size: 4 680 876 032 bytes

I 21:35:29 Sectors: 2 285 584

I 21:35:29 Image Size: 4 681 564 160 bytes

I 21:35:29 Image Sectors: 2 285 920

I 21:35:31 Operation Successfully Completed! - Duration: 00:00:11

I 21:35:31 Operation Started!

I 21:35:31 Source File: -==/\/[bUILD IMAGE]\/\==-

I 21:35:31 Source File Sectors: 2 285 920 (MODE1/2048)

I 21:35:31 Source File Size: 4 681 564 160 bytes

I 21:35:31 Source File Application Identifier: IMGBURN V2.4.2.0 - THE ULTIMATE IMAGE BURNER!

I 21:35:31 Source File Implementation Identifier: ImgBurn

I 21:35:31 Source File File System(s): ISO9660; UDF (1.02)

I 21:35:31 Destination Device: [1:0:0] HL-DT-ST DVD-RAM GSA-H55N 1.03 (E:) (ATA)

I 21:35:31 Destination Media Type: DVD-RW (Disc ID: TDK502sakuM3) (Speeds: 2x)

I 21:35:31 Destination Media Sectors: 2 297 888

I 21:35:31 Write Mode: DVD

I 21:35:31 Write Type: DAO

I 21:35:31 Write Speed: 2x

I 21:35:31 Link Size: Auto

I 21:35:31 Test Mode: No

I 21:35:31 OPC: No

I 21:35:31 BURN-Proof: Enabled

I 21:35:31 Filling Buffer... (40 MB)

I 21:35:32 Writing LeadIn...

I 21:35:50 Writing Session 1 of 1... (1 Track, LBA: 0 - 2285919)

I 21:35:50 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 2285919)

I 22:03:55 Synchronising Cache...

I 22:04:27 Exporting Graph Data...

I 22:04:27 Graph Data File: C:\Documents and Settings\Admin\Application Data\ImgBurn\Graph Data Files\HL-DT-ST_DVD-RAM_GSA-H55N_1.03_21-ОКТОМВРИ-2008-Г-_21-35_TDK502sakuM3_2x.ibg

I 22:04:27 Export Successfully Completed!

I 22:04:27 Operation Successfully Completed! - Duration: 00:28:56

I 22:04:27 Average Write Rate: 2 713 KB/s (2.0x) - Maximum Write Rate: 2 783 KB/s (2.0x)

I 22:04:27 Cycling Tray before Verify...

W 22:04:37 Waiting for device to become ready...

I 22:05:03 Device Ready!

I 22:05:03 Operation Started!

I 22:05:03 Source Device: [1:0:0] HL-DT-ST DVD-RAM GSA-H55N 1.03 (E:) (ATA)

I 22:05:03 Source Media Type: DVD-RW (Book Type: DVD-RW) (Disc ID: TDK502sakuM3) (Speeds: 2x)

I 22:05:03 Image File: -==/\/[bUILD IMAGE]\/\==-

I 22:05:03 Image File Sectors: 2 285 920 (MODE1/2048)

I 22:05:03 Image File Size: 4 681 564 160 bytes

I 22:05:03 Image File Application Identifier: IMGBURN V2.4.2.0 - THE ULTIMATE IMAGE BURNER!

I 22:05:03 Image File Implementation Identifier: ImgBurn

I 22:05:03 Image File File System(s): ISO9660; UDF (1.02)

I 22:05:03 Read Speed (Data/Audio): MAX / MAX

E 22:05:03 Session 1, Track 1 is smaller on the disc than it is in the image file.

E 22:05:03 Disc's Track Sectors: 0 (TOC Sectors: 0)

E 22:05:03 Image File's Track Sectors: 2285920 (TOC Sectors: 2285920)

E 22:05:10 Operation Failed! - Duration: 00:00:00

I 22:05:10 Average Verify Rate: N/A - Maximum Verify Rate: N/A

Night_Raven · Октомври 21, 2008

Хмм, носителят трябва да е доста добър, ако е произведен в Тайван. По някакви причини обаче устройството не го харесва особено. Пробван ли е дискът на друго устройство? Пробва ли да обновиш фърмуеъра от 1.03 до 1.05?

Проблеми със записвачката

Препоръчан пост

Link to comment

Сподели другаде

ТОП потребители в тази тема

Популярни дни

ТОП потребители в тази тема

Популярни дни

Link to comment

Сподели другаде

Link to comment

Сподели другаде

Link to comment

Сподели другаде

Link to comment

Сподели другаде

Link to comment

Сподели другаде

Link to comment

Сподели другаде

Link to comment

Сподели другаде

Link to comment

Сподели другаде

Link to comment

Сподели другаде

Link to comment

Сподели другаде

Link to comment

Сподели другаде

Link to comment

Сподели другаде

Link to comment

Сподели другаде

Link to comment

Сподели другаде

Join the conversation