Проблем със записването на дискове

stormcaller · Декември 29, 2008

Здравейте!Имам проблем със записването на дискове, а проблема се състои в това, че когато започна записа, винаги на 3% ми изписва грешка "Burn process failed at (скоростта на която записвам)".Търсих из интернет начин да оправя проблема и в повечето случаи пише че DMA трябва да е активирано.Обаче при мене липсват Primary и Secondary IDE Channels, което не позволява да се активира DMA.Какво да направя за да може IDE channel-ите да се върнат на мястото си?Или по-точно какво да направя за да може пак да записвам дискове?Благодаря предварително!

panevdd · Декември 29, 2008

За начало можеш да дадеш информацията, която се изисква тук.

stormcaller · Декември 29, 2008

Модела на записвачката е LITE-ON DVDRW SOHW-1693S;операционната ми система е Windows XP SP2;използвам Nero Burning ROM версия 6.6.1.4;опитвам се да записвам на Maxell DVD+R; ползвам софтуер за емулация на дискови устройства - Daemon Tools, ето и log файла от Nero:

Staiko
Feeds
1A23-0609-9030-2431-3944-8193

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero 6\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 11:54:32 AM 

NT-SPTI used
Nero Version: 6.6.1.4
Internal Version: 6, 6, 1, 4d
(Nero Express)
Recorder:			 <LITE-ON DVDRW SOHW-1693S>Version: KS0B - HA 1 TA 0 - 6.6.1.4
Adapter driver:	  <IDE>					 HA 1
Drive buffer  :	  2048kB
Bus Type	  :	  default (0) -> ATAPI, detected: ?
CD-ROM:			   <Generic  DVD-ROM		 >Version: 1.0  - HA 1 TA 1 - 6.6.1.4
Adapter driver:	  <SCSI>					HA 1

=== Scsi-Device-Map ===
CdRomPeripheral	  : LITE-ON DVDRW SOHW-1693S	  nvatabus Port 0 ID 1  DMA: Off
DiskPeripheral	   : ST380817AS					nvatabus Port 1 ID 0  DMA: Off
CdRomPeripheral	  : Generic DVD-ROM		 1.0   st3shark Port 2 ID 0  DMA: Off
CdRomPeripheral	  : Generic DVD-ROM		 1.0   st3shark Port 2 ID 1  DMA: Off
CdRomPeripheral	  : Generic DVD-ROM		 1.0   st3shark Port 2 ID 2  DMA: Off
CdRomPeripheral	  : Generic DVD-ROM		 1.0   st3shark Port 2 ID 3  DMA: Off

=== CDRom-Device-Map ===
LITE-ON DVDRW SOHW-1693S   E:   CDRom0
Generic DVD-ROM			F:   CDRom1
Generic DVD-ROM			G:   CDRom2
Generic DVD-ROM			H:   CDRom3
Generic DVD-ROM			I:   CDRom4
=======================

AutoRun : 1
Excluded drive IDs: 
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE		   : 0
Physical memory	 : 1023MB (1047856kB)
Free physical memory: 326MB (334756kB)
Memory in use	   : 68 %
Uncached PFiles: 0x0
Use Inquiry	: 1
Global Bus Type: default (0)
Check supported media : Disabled (0) 

29.12.2008
ISO compilation
9:21:31 PM	#1 Text 0 File Isodoc.cpp, Line 6475
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate				: FALSE
Write				   : TRUE
Finalize CD			 : TRUE
Multisession			: FALSE
Burning mode			: DAO
Mode					: 1
ISO Level			   : 1 (Max. of 11 = 8 + 3 char)
Character set		   : ISO 9660
Joliet				  : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path  : TRUE
Write ISO9660;1 file extensions		: TRUE

9:21:31 PM	#2 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 262144KB of Memory

9:21:31 PM	#3 Text 0 File Reader.cpp, Line 124
Reader running

9:21:31 PM	#4 Text 0 File Writer.cpp, Line 122
Writer LITE-ON  DVDRW SOHW-1693S running

9:21:31 PM	#5 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)

9:21:31 PM	#6 Text 0 File Burncd.cpp, Line 3305
Turn on Disc-At-Once, using DVD media

9:21:32 PM	#7 Text 0 File DlgWaitCD.cpp, Line 281
Last possible write address on media:  2295103 (510:01.28, 4482MB)
Last address to be written:			1997311 (443:50.61, 3900MB)

9:21:32 PM	#8 Text 0 File DlgWaitCD.cpp, Line 293
Write in overburning mode: NO (enabled: CD DVD)

9:21:32 PM	#9 Text 0 File DlgWaitCD.cpp, Line 2612
Recorder: LITE-ON DVDRW SOHW-1693S, Media type: DVD+R
 Disc Manufacturer ID: RITEK, Media Type ID: F16, Product revision number: 1
 Disc Application Code: 0, Extended Information Indicators: 7

9:21:32 PM	#10 Text 0 File DlgWaitCD.cpp, Line 459
>>> Protocol of DlgWaitCD activities: <<<
=========================================

9:21:32 PM	#11 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
 0: TRM_DATA_MODE1 ()
	2 indices, index0 (150) not provided
	original disc pos #0 + 1997312 (1997312) = #1997312/443:50.62
	relocatable, disc pos for caching/writing not required/ required, no patch infos
	-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1997312 blocks [LITE-ON  DVDRW SOHW-1693S]
--------------------------------------------------------------

9:21:32 PM	#12 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [LITE-ON  DVDRW SOHW-1693S] for write in CUE-sheet-DAO
DAO infos:
==========
 MCN: ""
 TOCType: 0x00; Session Closed, disc fixated
 Tracks 1 to 1:
   1: TRM_DATA_MODE1, 2048/0x00, FilePos			 0			 0	4090494976, ISRC ""
DAO layout:
===========
 __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
	   0 |  lead-in |   0 |	0x41 | 0x00
	   0 |		1 |   0 |	0x41 | 0x00
	   0 |		1 |   1 |	0x41 | 0x00
 1997312 | lead-out |   1 |	0x41 | 0x00

9:21:32 PM	#13 Text 0 File SCSIPassThrough.cpp, Line 38
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

9:21:32 PM	#14 Text 0 File SCSIPassThrough.cpp, Line 83
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

9:21:32 PM	#15 Phase 24 File dlgbrnst.cpp, Line 1685
Caching of files started

9:21:32 PM	#16 Text 0 File Burncd.cpp, Line 4145
Cache writing successful.

9:21:32 PM	#17 Phase 25 File dlgbrnst.cpp, Line 1685
Caching of files completed

9:21:32 PM	#18 Phase 36 File dlgbrnst.cpp, Line 1685
Burn process started at 8x (11,080 KB/s)

9:21:32 PM	#19 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

9:21:32 PM	#20 Text 0 File Cdrdrv.cpp, Line 8647
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
 Book Type: DVD+R   (10), Part Version: 1.0x (1)
 Disc Size: 120 mm,	  Maximum Rate: <not specified> (F h)
 Number of Layers: 1,	Track Path: Parallel Track Path (PTP),  Layer Type: recordable
 Linear Density:		 0,267 um/bit,  Track Density:  0,74 um/track
 Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
 End Physical Sector Number of Data Area:	  26053F h
 End Sector Number in Layer 0:				 0 h (LBN: FFFD0000 h, 4193920 MB)
 Data in Burst Cutting Area (BCA) does not exist
  Disc Application Code: 0 / 0 h
  Extended Information indicators: 7 h
  Disc Manufacturer ID: RITEK...
  Media type ID: F16
  Product revision number: 1
  Number of Physical format information bytes in use in ADIP up to byte 63: 56
 Media Specific [16..63]:
	  00 00 07 52 49 54 45 4B - 00 00 00 46 31 36 01 38	...RITEK...F16.8
	  23 54 37 12 02 50 6E 02 - 8C 68 16 16 0B 0B 0A 0A	#T7..Pn..h......
	  01 1D 1E 0C 0C 12 12 01 - 00 00 00 00 00 00 00 00	................

9:21:32 PM	#21 Text 0 File DVDR.cpp, Line 6036
Drive: LITE-ON  DVDRW SOHW-1693S
Book Type request [LO], rev 3: DVD-ROM
Changing the Book Type was finished successfully, return code 0

9:21:32 PM	#22 CDR -1207 File DVDR.cpp, Line 5463
Book Type automatically set to: DVD-ROM

9:21:32 PM	#23 Text 0 File DVDPlusRW.cpp, Line 666
Start write address at LBA 0
DVD high compatibility mode: Yes

9:24:14 PM	#24 SPTI -1106 File SCSIPassThrough.cpp, Line 289
E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1106)
Sense Key:  0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data:   0x2A 00 00 00 00 00 00 00 20 00 00 00 
Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 73 03 
Buffer x06d50000: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 

9:24:14 PM	#25 CDR -1106 File Writer.cpp, Line 311
Power calibration error
E: LITE-ON DVDRW SOHW-1693S

9:24:15 PM	#26 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

9:24:15 PM	#27 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

9:24:15 PM	#28 Phase 127 File dlgbrnst.cpp, Line 1685
Generating DVD high compatibility borders

9:24:15 PM	#29 Phase 129 File dlgbrnst.cpp, Line 1685
Generating DVD borders completed successfully

9:24:15 PM	#30 Text 0 File DVDR.cpp, Line 6036
Drive: LITE-ON  DVDRW SOHW-1693S
Book Type request [LO], rev 3: DVD+R
Changing the Book Type was finished successfully, return code 0

9:24:15 PM	#31 Phase 38 File dlgbrnst.cpp, Line 1685
Burn process failed at 8x (11,080 KB/s)


Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=9464 bytes, created 3/8/2007 1:51:00 AM 
File 'Drivers\PXHELP20.SYS': Ver=3.00.56a, size=43528 bytes, created 3/8/2007 1:51:00 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\scsiport.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=96256 bytes, created 8/4/2004 3:07:00 AM (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

Night_Raven · Декември 29, 2008

Виждам, че устройството ти вече е с последната версия на фърмуера, така че това отпада като вариант. Направи шот на Device Manager с "отворена" категория IDE ATA/ATAPI controllers.

stormcaller · Декември 29, 2008

Ето:

http://img149.imageshack.us/img149/1179/fgfdhfop9.jpg

Night_Raven · Декември 29, 2008

Виждам, че ползва IDE драйвера на NVIDIA, а не този на Microsoft. Лично аз бих препоръчал втория. Драйверите на NVIDIA за IDE са в някои случаи по-бързи, но са и по-нестабилни. Бих ти препоръчал да ги премахнеш и да върнеш оригиналните на Microsoft.

Това става, като идеш в Add or remove programs, намериш NVIDIA Drivers, кликнеш Change/Remove, избереш Remove only the following, поставиш отметка на IDE драйвера и кликнеш Remove. Всъщност това е по-скоро ориентировъчно описание, защото при по-новите пакети (след nForce 2) може да са сменили това-онова.

Ако не ти се маха този драйвер отсега, можеш първо да кликнеш с десния бутон върху NVIDIA nForce3 250 Parallel ATA Controller, да избереш Uninstall, да потвърдиш с OK и да рестартираш компютъра. Това ще накара системата да засече и инсталира наново контролера. Ако обаче това не помогне, ще е много желателно да прибегнеш до горния метод.

Ако нито един от двата варианта не дава положителни резултати, то най-вероятно записвачката ти не харесва диска, на които се опитваш да записваш. Ако е диск от шпиндел, опитай някой друг празен диск за всеки случай, защото дисковете ти не са особено качествени и е напълно нормално да има калпави бройки в шпиндела.

stormcaller · Декември 29, 2008

Много благодаря за помощта!Обаче се оказа, че е от диска, пробвах с друг и стана.Весели празници!

Влез

Проблем със записването на дискове

Препоръчан пост

stormcaller

Link to comment

Сподели другаде

panevdd

Link to comment

Сподели другаде

stormcaller

Link to comment

Сподели другаде

Night_Raven

Link to comment

Сподели другаде

stormcaller

Link to comment

Сподели другаде

Night_Raven

Link to comment

Сподели другаде

stormcaller

Link to comment

Сподели другаде

Join the conversation

Разгледай

Какво ново?