Прехвърляне към съдържание


Снимка

Проблеми със записвачката


  • Моля, влезте, за да отговорите
53 отговора по тази тема

#1 vladimirow

vladimirow

    Потребител

  • Потребители
  • ПипПипПипПипПипПип
  • 98 мнения
  • Пол:Мъж
  • Живущ в:гр.София
  • Интереси:Всичко свързано с компютъра.Освен това книги, филми, футбол, реклама...

Публикувано: 20 October 2008 - 09:05

Здравейте, отскоро се появи някакъв проблем с моята записвачка - тя е модел HL-DT-ST DVD-RAM
GSA-H55N.Работеше нормално до известно време, после не ми разпознаваше някои от дисковете.Не можеше да
ги трие и ми съобщаваше че тези дискове са празни, въпреки че бяха записани.Преинсталирах
Windowsa.Направих някои настроики от описаните тук във форумите.Сложих двете у-ва да бъдат на DMA if
available.Инсталирах най новата весия на НЕРОТО - 9.Преди това видях че няма ASPI DRIVERS, намерих ги и
ги инсталирах.Записваше нормално до едно време и после пак започна същите изпълнения.И то със чисто нови
дискове - SONY DVD+RW, Maxell DVD+RW.Бях инсталирал преди НЕРОТО - CDBurnerXP, при нея беше същото -
сложа диска, пусна го да записва и в същия момент излиза от у-вото.Иначе когато сложа Boot disk на
Windows го стартира без проблеми.Имам и една друга записвачка - CD-RW.Тук по надолу качвам LOG фаилове
на различни записи - ако някои може да помогне със съвети за тези проблеми.Операционната ми с-ма е Windows XP, серв.пак 3.Прочетох почти всичко по форума тук и на други места, но така и не можах да разбера причината.Моля за помощ.


Как и къде да кача изображенията, т.е. LOG фаилове на записването?

#2 Night_Raven

Night_Raven

    Subject Delta

  • Администратори
  • ПипПипПипПипПипПип
  • 22269 мнения
  • Пол:Мъж
  • Живущ в:Rapture (Русе)

Публикувано: 20 October 2008 - 12:09

Какви точно проблеми има устройството? Какви дискове чете и какви не чете, какви дискове записва и какви не записва? CD-RW устройството справя ли се успешно? Фърмуеърт обновен ли е до последната версия?
Съдържанието на LOG файловете можеш да го пуснеш директно във форума или да прикачиш текстов(и) файл(ове) към коментара си.
ASPI драйвери общо взето не са нужни.

Love is just a chemical, no matter the origin. We give it meaning by choice.

 

- Eleanor Lamb


#3 vladimirow

vladimirow

    Потребител

  • Потребители
  • ПипПипПипПипПипПип
  • 98 мнения
  • Пол:Мъж
  • Живущ в:гр.София
  • Интереси:Всичко свързано с компютъра.Освен това книги, филми, футбол, реклама...

Публикувано: 20 October 2008 - 13:59

Windows XP 5.1
IA32
WinAspi: -

NT-SPTI used
Nero Version: 9.0.9.100
Internal Version: 9, 0, 9, 100
(Nero Express)
Recorder: <HL-DT-ST DVD-RAM GSA-H55N>Version: 1.02 - HA 1 TA 0 - 9.0.9.100
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default
CD-ROM: <HL-DT-ST DVD-RAM GSA-H55N>Version: 1.02 - HA 1 TA 0 - 9.0.9.100
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : WDC WD800BB-00DKA0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : WDC WD1600AAJB-00PVA0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : HL-DT-ST DVD-RAM GSA-H55N atapi Port 1 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST CD-RW GCE-8525B atapi Port 1 ID 1 DMA: On

=== CDRom-Device-Map ===
HL-DT-ST DVD-RAM GSA-H55N E: CdRom0
HL-DT-ST CD-RW GCE-8525B F: CdRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1023MB (1048048kB)
Free physical memory: 609MB (624056kB)
Memory in use : 40 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

19.10.2008
ISO compilation
20:51:39 #1 Text 0 File SCSIPTICommands.cpp, Line 450
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

20:51:39 #2 Text 0 File Isodoc.cpp, Line 6789
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

20:51:39 #3 ISO9660GEN -11 File Geniso.cpp, Line 3349
First writeable address = 0 (0x00000000)

20:51:39 #4 SPTI -1080 File SCSIPassThrough.cpp, Line 215
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1080)
CDB Data: 0x51 00 00 00 00 00 00 00 20 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x00
Sense Area: 0x70 00 02 00 00 00 00 0E 00 00 00 00 3A
Buffer x04a126c0: Len x20

20:51:39 #5 SPTI -1080 File SCSIPassThrough.cpp, Line 215
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1080)
CDB Data: 0x51 00 00 00 00 00 00 00 20 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x00
Sense Area: 0x70 00 02 00 00 00 00 0E 00 00 00 00 3A
Buffer x04a126c0: Len x20

20:51:39 #6 SPTI -1080 File SCSIPassThrough.cpp, Line 215
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1080)
CDB Data: 0x52 01 00 00 00 FF 00 00 20 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x00
Sense Area: 0x70 00 02 00 00 00 00 0E 00 00 00 00 3A
Buffer x04a126c0: Len x20

20:51:39 #7 SPTI -1080 File SCSIPassThrough.cpp, Line 215
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1080)
CDB Data: 0x51 00 00 00 00 00 00 00 20 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x00
Sense Area: 0x70 00 02 00 00 00 00 0E 00 00 00 00 3A
Buffer x04a126c0: Len x20

20:51:39 #8 SPTI -1080 File SCSIPassThrough.cpp, Line 215
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1080)
CDB Data: 0x52 01 00 00 00 FF 00 00 20 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x00
Sense Area: 0x70 00 02 00 00 00 00 0E 00 00 00 00 3A
Buffer x04a126c0: Len x20

20:51:39 #9 Text 0 File Burncd.cpp, Line 3563
Turn on Disc-At-Once, using DVD media

20:51:39 #10 SPTI -1080 File SCSIPassThrough.cpp, Line 215
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1080)
CDB Data: 0x51 00 00 00 00 00 00 00 20 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x00
Sense Area: 0x70 00 02 00 00 00 00 0E 00 00 00 00 3A
Buffer x04a126c0: Len x20

20:51:39 #11 SPTI -1080 File SCSIPassThrough.cpp, Line 215
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1080)
CDB Data: 0x51 00 00 00 00 00 00 00 20 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x00
Sense Area: 0x70 00 02 00 00 00 00 0E 00 00 00 00 3A
Buffer x04a126c0: Len x20

20:51:39 #12 SPTI -1080 File SCSIPassThrough.cpp, Line 215
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1080)
CDB Data: 0x52 01 00 00 00 FF 00 00 20 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x00
Sense Area: 0x70 00 02 00 00 00 00 0E 00 00 00 00 3A
Buffer x04a126c0: Len x20

20:51:39 #13 SPTI -1080 File SCSIPassThrough.cpp, Line 215
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1080)
CDB Data: 0x51 00 00 00 00 00 00 00 20 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x00
Sense Area: 0x70 00 02 00 00 00 00 0E 00 00 00 00 3A
Buffer x04a126c0: Len x20

20:51:39 #14 SPTI -1080 File SCSIPassThrough.cpp, Line 215
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1080)
CDB Data: 0x52 01 00 00 00 FF 00 00 20 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x00
Sense Area: 0x70 00 02 00 00 00 00 0E 00 00 00 00 3A
Buffer x04a126c0: Len x20

20:51:55 #15 Phase 40 File dlgbrnst.cpp, Line 1767
Aborted by user

20:51:55 #16 Text 0 File DlgWaitCD.cpp, Line 324
Write in overburning mode: NO (enabled: CD DVD)

20:51:55 #17 Text 0 File DlgWaitCD.cpp, Line 2951
Recorder: HL-DT-ST DVD-RAM GSA-H55N;
CD type reading failed
ATIP Data: ?

20:51:55 #18 Text 0 File DlgWaitCD.cpp, Line 499
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert the disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD R/RW; DVD DL; DVD-RAM.)

20:51:55 #19 Text 0 File SCSIPTICommands.cpp, Line 450
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL


Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

Това е единият LOG фаил когато записах 1 диск и тои излезе сам от у-то

#4 Night_Raven

Night_Raven

    Subject Delta

  • Администратори
  • ПипПипПипПипПипПип
  • 22269 мнения
  • Пол:Мъж
  • Живущ в:Rapture (Русе)

Публикувано: 20 October 2008 - 14:02

Хубаво си дал LOG, но не виждам отговор на останалите въпроси.

Love is just a chemical, no matter the origin. We give it meaning by choice.

 

- Eleanor Lamb


#5 vladimirow

vladimirow

    Потребител

  • Потребители
  • ПипПипПипПипПипПип
  • 98 мнения
  • Пол:Мъж
  • Живущ в:гр.София
  • Интереси:Всичко свързано с компютъра.Освен това книги, филми, футбол, реклама...

Публикувано: 20 October 2008 - 14:19

ТОВА Е ДРУГ LOG фаил КОГАТО ЗАПИСАХ ЦЯЛ ДИСК



Windows XP 5.1
IA32
WinAspi: -

NT-SPTI used
Nero Version: 9.0.9.100
Internal Version: 9, 0, 9, 100
(Nero Express)
Recorder: <HL-DT-ST DVD-RAM GSA-H55N>Version: 1.02 - HA 1 TA 0 - 9.0.9.100
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default
CD-ROM: <HL-DT-ST DVD-RAM GSA-H55N>Version: 1.02 - HA 1 TA 0 - 9.0.9.100
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : WDC WD800BB-00DKA0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : WDC WD1600AAJB-00PVA0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : HL-DT-ST DVD-RAM GSA-H55N atapi Port 1 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST CD-RW GCE-8525B atapi Port 1 ID 1 DMA: On

=== CDRom-Device-Map ===
HL-DT-ST DVD-RAM GSA-H55N E: CdRom0
HL-DT-ST CD-RW GCE-8525B F: CdRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1023MB (1048048kB)
Free physical memory: 651MB (666784kB)
Memory in use : 36 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

19.10.2008
UDF compilation
21:42:22 #1 Text 0 File SCSIPTICommands.cpp, Line 450
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

21:42:22 #2 Text 0 File Isodoc.cpp, Line 6789
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
UDF Mode : pure
UDF Options : automatic
UDF Revision : 1.02
UDF Partition Type : physical

21:42:23 #3 Text 0 File Burncd.cpp, Line 3563
Turn on Disc-At-Once, using DVD media

21:42:23 #4 Text 0 File FilesystemSettingsValidator.cpp, Line 142
FS Settings: using validator 'CUDFSettingsValidatorDVD'
ParamMode = 'automatic', changing UDF partition type from 'physical' to 'physical'
Changing UDF revision from '1.02' to '1.02'

21:42:23 #5 Text 0 File DlgWaitCD.cpp, Line 312
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2202383 (489:25.08, 4301MB)

21:42:23 #6 Text 0 File DlgWaitCD.cpp, Line 324
Write in overburning mode: NO (enabled: CD DVD)

21:42:23 #7 Text 0 File DlgWaitCD.cpp, Line 2951
Recorder: HL-DT-ST DVD-RAM GSA-H55N, Media type: DVD+RW
Disc Manufacturer ID: <PHILIPS>, Media Type ID: <041>, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 1

21:42:23 #8 Text 0 File DlgWaitCD.cpp, Line 499
>>> Protocol of DlgWaitCD activities: <<<
=========================================

21:42:23 #9 Text 0 File ThreadedTransferInterface.cpp, Line 756
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2202384 (2202384) = #2202384/489:25.9
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2202384 blocks [E: HL-DT-ST DVD-RAM GSA-H55N]
--------------------------------------------------------------

21:42:23 #10 Text 0 File ThreadedTransferInterface.cpp, Line 958
Prepare [E: HL-DT-ST DVD-RAM GSA-H55N] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4510482432, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 2202384 | 0 | 0x00
2202384 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

21:42:26 #11 Text 0 File SCSIPTICommands.cpp, Line 240
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

21:42:26 #12 Text 0 File Burncd.cpp, Line 4362
Caching options: cache CDRom or Network-Yes, small files-Yes (<64KB)

21:42:26 #13 Phase 24 File dlgbrnst.cpp, Line 1767
Caching of files started

21:42:27 #14 Text 0 File Burncd.cpp, Line 4484
Cache writing successful.

21:42:27 #15 Phase 25 File dlgbrnst.cpp, Line 1767
Caching of files completed

21:42:27 #16 Phase 36 File dlgbrnst.cpp, Line 1767
Burn process started at 4x (5 540 KB/s)

21:42:27 #17 Text 0 File ThreadedTransferInterface.cpp, Line 2675
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

21:42:27 #18 Text 0 File Cdrdrv.cpp, Line 10187
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+RW (9), Part Version: 1.1x (2)
Disc Size: 120 mm, Maximum Transfer Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 1 h
Disc Manufacturer ID: PHILIPS.
Media type ID: 041
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 57
Media Specific [16..783]:
00 00 01 50 48 49 4C 49 - 50 53 00 30 34 31 00 39 ...PHILIPS.041.9
23 00 9F 7C 5C 02 28 00 - 9A 7E 70 02 28 00 A0 7B #..|\.(..~p.(..{
68 02 28 04 04 20 E0 00 - F0 00 00 00 00 00 00 00 h.(.............
01 00 17 38 00 28 8B 46 - 02 2C 00 2E 8A 3A 02 2C ...8.(.F.,...:.,
00 2C 8C 3C 02 2C 28 35 - 50 00 20 00 40 20 00 00 .,.<.,(5P...@...
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

21:42:27 #19 Text 0 File DVDR.cpp, Line 6632
Drive: HL-DT-ST DVD-RAM GSA-H55N
Book Type request [LG]: DVD-ROM
Book Type setting not supported for the loaded disc type

21:42:27 #20 Phase 98 File dlgbrnst.cpp, Line 1767
Start formatting disc before burning

21:43:06 #21 Phase 100 File dlgbrnst.cpp, Line 1767
Formatting disc was successful

21:43:06 #22 Text 0 File DVDPlusRW.cpp, Line 675
Start write address at LBA 0
DVD high compatibility mode: Yes

21:43:06 #23 Text 0 File ThreadedTransfer.cpp, Line 273
Pipe memory size 83836800

21:43:06 #24 Text 0 File CUDFTransferItem2.cpp, Line 660

GenUDF2 FS Layout:
=-=-=-=-=-=-=-=-=-=-
Sectors to be written: 2202384
Session Start: Sector 0
Volume Structure: Sector [0, 256] (257 Sectors)
Meta Data: Sector [257, 285] (29 Sectors)
Data: Sector [286, 2202081] (2201796 Sectors)
After Data: Sector [2202082, 2202095] (14 Sectors)
Trailer Track: Sector [2202096, 2202383] (288 Sectors)

GenUDF2 Parameters:
=-=-=-=-=-=-=-=-=-=-
PrepTime: 10-19-2008 21:42:23
UDF Revision: 1.02
UDF Partition Type: Physical
UDF Special Mode: None
Bytes per Sector: 2048
Session Start: 0
Physical Partition Start: -1
Total Capacity: 2295104
Multi Session Mode: Begin
Disc Type: DVD+RW
OS Class: 0
Volume ID: My Disc
Allow Unicode Labels: 0
Duplicate Meta Data: 1
MS Info File: 04A31238
VMS Rollback File: 00000000
Create ISO bridge: 0
ECC Block Length: 16
Sparing Packet Length: 32
Allocation Unit Size: 32
Alignment Unit Size: 16
Make Writable: 0
Access Type: Read-only

21:56:40 #25 Text 0 File WriterStatus.cpp, Line 245
<E: HL-DT-ST DVD-RAM GSA-H55N> start writing Lead-Out at LBA 2202384 (219B10h), length 0 blocks

21:56:41 #26 Text 0 File DVDPlusRW.cpp, Line 900
Media-Format will be stopped after burning

21:56:41 #27 Phase 127 File dlgbrnst.cpp, Line 1767
Generating DVD high compatibility borders

21:57:35 #28 Text 0 File DVDPlusRW.cpp, Line 943
EndDAO: Last written address 2202384

21:57:35 #29 Text 0 File DVDPlusDualLayer.cpp, Line 1424
SetDriveCaps: Set LAST LBA of layer 1 to 0

21:57:35 #30 Phase 37 File dlgbrnst.cpp, Line 1767
Burn process completed successfully at 4x (5 540 KB/s)

21:57:35 #31 Phase 78 File dlgbrnst.cpp, Line 1767
Data verification started

21:57:38 #32 Text 0 File ThreadedTransfer.cpp, Line 273
Pipe memory size 590400

21:57:38 #33 Text 0 File CUDFTransferItem2.cpp, Line 660

GenUDF2 FS Layout:
=-=-=-=-=-=-=-=-=-=-
Sectors to be written: 2202384
Session Start: Sector 0
Volume Structure: Sector [0, 256] (257 Sectors)
Meta Data: Sector [257, 285] (29 Sectors)
Data: Sector [286, 2202081] (2201796 Sectors)
After Data: Sector [2202082, 2202095] (14 Sectors)
Trailer Track: Sector [2202096, 2202383] (288 Sectors)

GenUDF2 Parameters:
=-=-=-=-=-=-=-=-=-=-
PrepTime: 10-19-2008 21:42:23
UDF Revision: 1.02
UDF Partition Type: Physical
UDF Special Mode: None
Bytes per Sector: 2048
Session Start: 0
Physical Partition Start: -1
Total Capacity: 2295104
Multi Session Mode: Begin
Disc Type: DVD+RW
OS Class: 0
Volume ID: My Disc
Allow Unicode Labels: 0
Duplicate Meta Data: 1
MS Info File: 04A31238
VMS Rollback File: 00000000
Create ISO bridge: 0
ECC Block Length: 16
Sparing Packet Length: 32
Allocation Unit Size: 32
Alignment Unit Size: 16
Make Writable: 0
Access Type: Read-only

22:10:22 #34 Phase 80 File dlgbrnst.cpp, Line 1767
Data verification completed successfully

22:10:26 #35 Text 0 File SCSIPTICommands.cpp, Line 287
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

22:10:32 #36 Text 0 File Cdrdrv.cpp, Line 11444
DriveLocker: UnLockVolume completed

22:10:32 #37 Text 0 File SCSIPTICommands.cpp, Line 450
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL


Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)



Фърмуеърт не е обновен защото не знам как, а и да не я повредя засега без напътствия...
Чете всички дискове - DVD-R, вече записани - BENQ DVD-R, hp DVD-R I DVD+R, но 1 SONY DVD+RW които купих същия ден и записах върху него 1 филм след това започна да го вади от у-то при опит за запис.От горните дискове имам наи много.Също така чете и CD дискове - например Verbatim ТОЗИ НА КОИТО МИ Е ВИНДОВСА И ДРУГИ.
CD-RW устройството справя ли се успешно? - НЕ.Не бях го ползвал 1 година и при първото запиосване ми изяде 1 диск - модел HL-DT-ST CD-RW GCE-8525B

#6 Night_Raven

Night_Raven

    Subject Delta

  • Администратори
  • ПипПипПипПипПипПип
  • 22269 мнения
  • Пол:Мъж
  • Живущ в:Rapture (Русе)

Публикувано: 20 October 2008 - 14:50

Желателно е да обновиш фърмуеърите на устройствата до последните им версии. Особено на DVD записвачката. Не мога да дам максимално точни и конкретни инструкции, защото нямам устройства на LG, а единият фърмуеър не иска да се стартира, ако не засече съответното устройство. И все пак мога да дам насоки.

За CD-RW устройството:
1) изтегли и разархивирай GCE-8525B 1.04;
2) спри всички допълнителни програми и процеси, за да останат само най-важните като антивирусна, защитна стена и подобни;
3) увери се, че в устройството няма диск и че шейната му е прибрани;
4) стартирай GCE-8525B104(W).exe;
5) според LG обновяването трябва да започне автоматично, но ако не започне, от падащото меню избери съответното устройство (ако не е вече избрано) и кликни бутон Upgrade;
6) ако иска някакви потвърждения дали да потвърди, съгласи се;
7) изчакай да приключи флашването;
8) след като приключи флашването ще е нужен рестарт на системата, така че ако флашерът попита дали да рестартира, се съгласи; ако не попита за рестарт, рестартирай ръчно;
9) готово.

За DVD-RW устройството:
1) изтегли и разархивирай GSA-H55N 1.05;
2) спри всички допълнителни програми и процеси, за да останат само най-важните като антивирусна, защитна стена и подобни;
3) увери се, че в устройството няма диск и че шейната му е прибрани;
4) стартирай GSA-H55N_1.05.exe;
5) кликни бутон Update и потвърди на евентуални въпроси дали си сигурен, че искаш да обновиш фърмуеъра;
6) изчакай да приключи флашването;
7) след като приключи флашването ще е нужен рестарт на системата, така че ако флашерът попита дали да рестартира, се съгласи; ако не попита за рестарт, рестартирай ръчно;
8) готово.

Докато тече флашване не прави нищо на компютъра и не спирай захранването му. Не прави 2 флашвания наведнъж, а едно по едно.

Love is just a chemical, no matter the origin. We give it meaning by choice.

 

- Eleanor Lamb


#7 vladimirow

vladimirow

    Потребител

  • Потребители
  • ПипПипПипПипПипПип
  • 98 мнения
  • Пол:Мъж
  • Живущ в:гр.София
  • Интереси:Всичко свързано с компютъра.Освен това книги, филми, футбол, реклама...

Публикувано: 20 October 2008 - 15:48

В момента сам на работа, като се върна ще пиша какво е станало.Както казах след преинсталацията бях инсталирал Daemon Tools, но го разкарах моментално.Почистих рег. от него с една малка програма - ЕВЕНТУАЛНО АКО Е ОСТАНАЛА СЛЕДА ОТ ДРАЙВЕРА - SPTD 1.55, ПОНЕЖЕ ТОЙ НЕ СЕ ДЕИНСТАЛИРА КАКТО ТРЯБВА.След това с тази програмка - XP_CD-DVD-Fix, почистих реда от регистратурата, отговорен за файловите филтри на устройствата.После видях че едната записвачка CD-RW беше на PIO only и я нагласих на DMA.После почистих и двете у-ва с почистващи дискове поотделно. И така работеше нормално до този момент.

#8 Night_Raven

Night_Raven

    Subject Delta

  • Администратори
  • ПипПипПипПипПипПип
  • 22269 мнения
  • Пол:Мъж
  • Живущ в:Rapture (Русе)

Публикувано: 20 October 2008 - 16:13

Преди да флашнеш фърмуеърите можеш да деинсталираш IDE контролера:
Start -> Run -> devmgmt.msc -> OK -> двоен клик върху IDE ATA/ATAPI controllers -> кликаш с десния бутон върху IDE контролера (името му може да е различно от Standard Dual Channel PCI IDE controller, ако имаш различни драйвери за него от тези на Microsoft), избираш Uninstall и потвърждаваш с OK, след което рестартираш компютъра. Това ще накара системата да инсталира наново IDE устройствата и евентуално ще оправи проблеми с PIO режима.

Love is just a chemical, no matter the origin. We give it meaning by choice.

 

- Eleanor Lamb


#9 vladimirow

vladimirow

    Потребител

  • Потребители
  • ПипПипПипПипПипПип
  • 98 мнения
  • Пол:Мъж
  • Живущ в:гр.София
  • Интереси:Всичко свързано с компютъра.Освен това книги, филми, футбол, реклама...

Публикувано: 20 October 2008 - 21:00

Появи се проблем с обновяването на фърмуеъра за DVD записвачката - изписа ми следното нещо,,Valid ATAPI device can not be found!!! F/M model is DVD RAM GSA H55N,, - OK... Иначе инсталацията на другото у-во {CD-RW} мина без проблем. http://prikachi.com/users/val67/1Z.jpg

Ето и едни други снимки от драйвърити който са инсталирани в момента - може да помогнат: http://prikachi.com/users/val67/2q.jpg,
http://prikachi.com/users/val67/3D.jpg

Сега ще пробвам един запис на CD-RW записвачката да видя какво ще стане и ще ти публикувам резултата

Записа се провали за съжаление - http://prikachi.com/files/410617m.jpg

http://prikachi.com/files/410617m.jpg


Ще кача и 1 LOG файл

Ето и файла:






Windows XP 5.1
IA32
WinAspi: -

NT-SPTI used
Nero Version: 9.0.9.100
Internal Version: 9, 0, 9, 100
(Nero Express)
Recorder: <HL-DT-ST CD-RW GCE-8525B>Version: 1.04 - HA 1 TA 0 - 9.0.9.100
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default
CD-ROM: <HL-DT-ST CD-RW GCE-8525B >Version: 1.04 - HA 1 TA 0 - 9.0.9.100
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : WDC WD800BB-00DKA0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : WDC WD1600AAJB-00PVA0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : HL-DT-ST DVD-RAM GSA-H55N atapi Port 1 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST CD-RW GCE-8525B atapi Port 1 ID 1 DMA: On

=== CDRom-Device-Map ===
HL-DT-ST CD-RW GCE-8525B E: CdRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1023MB (1048048kB)
Free physical memory: 608MB (623184kB)
Memory in use : 40 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

20.10.2008
CD-ROM (ISO)
21:38:59 #1 Text 0 File SCSIPTICommands.cpp, Line 450
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

21:38:59 #2 Text 0 File Isodoc.cpp, Line 6789
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

21:38:59 #3 Text 0 File Burncd.cpp, Line 3233
HL-DT-ST CD-RW GCE-8525B
Buffer underrun protection activated

21:38:59 #4 ISO9660GEN -11 File Geniso.cpp, Line 3349
First writeable address = 0 (0x00000000)

21:38:59 #5 Text 0 File ThreadedTransferInterface.cpp, Line 1029
Removed 2 run-out blocks from end of track 0. Length: 358494 -> 358492.

21:38:59 #6 Text 0 File Burncd.cpp, Line 3563
Turn on Track-At-Once, using CD-R/RW media

21:38:59 #7 Text 0 File ThreadedTransferInterface.cpp, Line 1029
Removed 2 run-out blocks from end of track 1. Length: 358494 -> 358492.

21:38:59 #8 Text 0 File FilesystemSettingsValidator.cpp, Line 142
FS Settings: using validator 'CUDFSettingsValidatorCD'
ParamMode = 'automatic', changing UDF partition type from 'physical' to 'physical'
Changing UDF revision from '1.02' to '1.02'

21:38:59 #9 Text 0 File ThreadedTransferInterface.cpp, Line 1029
Removed 2 run-out blocks from end of track 1. Length: 358494 -> 358492.

21:38:59 #10 Text 0 File DlgWaitCD.cpp, Line 312
Last possible write address on media: 359847 ( 79:59.72)
Last address to be written: 358493 ( 79:41.68)

21:38:59 #11 Text 0 File DlgWaitCD.cpp, Line 324
Write in overburning mode: NO (enabled: CD DVD)

21:38:59 #12 Text 0 File DlgWaitCD.cpp, Line 2951
Recorder: HL-DT-ST CD-RW GCE-8525B;
CDR code: 00 97 34 23; OSJ entry from: Mitsubishi Chemical
ATIP Data:
Special Info [hex] 1: C0 00 98, 2: 61 22 17 (LI 97:34.23), 3: 4F 3B 49 (LO 79:59.73)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid)

21:38:59 #13 Text 0 File DlgWaitCD.cpp, Line 499
>>> Protocol of DlgWaitCD activities: <<<
=========================================

21:38:59 #14 Text 0 File ThreadedTransferInterface.cpp, Line 756
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 358494 (358494) = #358494/79:39.69
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 358492 blocks [E: HL-DT-ST CD-RW GCE-8525B]
--------------------------------------------------------------

21:38:59 #15 Text 0 File ThreadedTransferInterface.cpp, Line 958
Prepare [E: HL-DT-ST CD-RW GCE-8525B] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 734502912, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
-150 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
-150 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 358494 | 0 | 0x00
358494 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

21:38:59 #16 Text 0 File ThreadedTransferInterface.cpp, Line 1029
Removed 2 run-out blocks from end of track 1. Length: 358494 -> 358492.

21:39:00 #17 Text 0 File SCSIPTICommands.cpp, Line 240
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

21:39:00 #18 Text 0 File Burncd.cpp, Line 4362
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)

21:39:00 #19 Phase 24 File dlgbrnst.cpp, Line 1767
Caching of files started

21:39:00 #20 Text 0 File Burncd.cpp, Line 4484
Cache writing successful.

21:39:00 #21 Phase 25 File dlgbrnst.cpp, Line 1767
Caching of files completed

21:39:00 #22 Phase 36 File dlgbrnst.cpp, Line 1767
Burn process started at 24x (3 600 KB/s)

21:39:00 #23 Text 0 File ThreadedTransferInterface.cpp, Line 2675
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

21:39:00 #24 Text 0 File MMC.cpp, Line 22511
Set BUFE: Buffer underrun protection -> ON

21:39:00 #25 Text 0 File ThreadedTransfer.cpp, Line 273
Pipe memory size 83836800

21:41:02 #26 SPTI -1135 File SCSIPassThrough.cpp, Line 215
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
CDB Data: 0x2A 00 00 02 04 E0 00 00 20 00 00 00
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
Sense Area: 0x71 00 03 00 00 00 00 0A 00 00 00 00 0C
Buffer x0a724b80: Len x10000
0x15 77 C0 60 6B 70 1E 74 30 30 64 63 CA 16 00 00
0x00 00 01 B6 51 60 32 D0 1E 93 B3 90 7E 3D 20 26
0x16 FA E3 C9 77 BC 9D 20 7B C4 B8 3F 57 99 7B 09

21:41:02 #27 CDR -1135 File Writer.cpp, Line 306
Write error
E: HL-DT-ST CD-RW GCE-8525B

21:41:02 #28 CDR -201 File WriterStatus.cpp, Line 325
Invalid write state
E: HL-DT-ST CD-RW GCE-8525B

21:41:02 #29 TRANSFER -18 File WriterStatus.cpp, Line 325
Could not perform EndTrack

21:41:02 #30 Text 0 File MMC.cpp, Line 17309
<HL-DT-STCD-RW GCE-8525B > start Close Track #2

21:41:28 #31 Phase 38 File dlgbrnst.cpp, Line 1767
Burn process failed at 24x (3 600 KB/s)

21:41:29 #32 Text 0 File SCSIPTICommands.cpp, Line 287
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

21:41:34 #33 Text 0 File Cdrdrv.cpp, Line 11444
DriveLocker: UnLockVolume completed

21:41:34 #34 Text 0 File SCSIPTICommands.cpp, Line 450
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL


Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

Прикрепен(и) файл(ове)



#10 Night_Raven

Night_Raven

    Subject Delta

  • Администратори
  • ПипПипПипПипПипПип
  • 22269 мнения
  • Пол:Мъж
  • Живущ в:Rapture (Русе)

Публикувано: 20 October 2008 - 22:58

DVD записвачката пробвай да я флашнеш с LG GSA-H55N 1.03 (885KB), да видим дали ще стане с тази версия.

Пробвай и да запишеш диска с ImgBurn и дай и от нея LOG (че LOG-овете на Nero ми докарват нервна криза), след като записът приключи и ако е неуспешен: View -> Log -> Ctrl+A -> Ctrl+C и пействаш тук. Ако случайно не можеш да се ориентираш в програмата, в тази тема има ръководство за нея.

Love is just a chemical, no matter the origin. We give it meaning by choice.

 

- Eleanor Lamb


#11 vladimirow

vladimirow

    Потребител

  • Потребители
  • ПипПипПипПипПипПип
  • 98 мнения
  • Пол:Мъж
  • Живущ в:гр.София
  • Интереси:Всичко свързано с компютъра.Освен това книги, филми, футбол, реклама...

Публикувано: 21 October 2008 - 07:10

Здравей, Night Raven.
Това ще стане довечера след работа - за флашването.Тогава и ще дам LOG от IMGBurn.A също така и от Everest, ако трябва - някоя програма може да създава конфликт.CD-RW е на около 4 год., а DVD-RW на 1 год.

#12 Night_Raven

Night_Raven

    Subject Delta

  • Администратори
  • ПипПипПипПипПипПип
  • 22269 мнения
  • Пол:Мъж
  • Живущ в:Rapture (Русе)

Публикувано: 21 October 2008 - 10:10

LOG от EVEREST не е нужен.

Love is just a chemical, no matter the origin. We give it meaning by choice.

 

- Eleanor Lamb


#13 vladimirow

vladimirow

    Потребител

  • Потребители
  • ПипПипПипПипПипПип
  • 98 мнения
  • Пол:Мъж
  • Живущ в:гр.София
  • Интереси:Всичко свързано с компютъра.Освен това книги, филми, футбол, реклама...

Публикувано: 21 October 2008 - 18:28

И с този файл не става - за обновяването на Firmware.Инсталирах ImgBurn, след малко ще пусна един диск да видя какво ще стане и ще ти публикувам резултата.

#14 vladimirow

vladimirow

    Потребител

  • Потребители
  • ПипПипПипПипПипПип
  • 98 мнения
  • Пол:Мъж
  • Живущ в:гр.София
  • Интереси:Всичко свързано с компютъра.Освен това книги, филми, футбол, реклама...

Публикувано: 21 October 2008 - 21:21

Сложих 1 диск но мисля че не стана добре както ще видиш - ето файла.Утре пак ще опитам.Обнових фърмуера с последния който даде преди това


I 21:32:07 ImgBurn Version 2.4.2.0 started!
I 21:32:07 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3)
I 21:32:07 Total Physical Memory: 1 048 048 KB - Available: 692 788 KB
I 21:32:07 Initialising SPTI...
I 21:32:07 Searching for SCSI / ATAPI devices...
I 21:32:08 Found 1 CD-RW and 1 DVD±RW/RAM!
I 21:35:20 Operation Started!
I 21:35:20 Building Image Tree...
I 21:35:29 Checking Directory Depth...
I 21:35:29 Calculating Totals...
I 21:35:29 Preparing Image...
I 21:35:29 Checking Path Length...
I 21:35:29 Contents: 42 Files, 2 Folders
I 21:35:29 Size: 4 680 876 032 bytes
I 21:35:29 Sectors: 2 285 584
I 21:35:29 Image Size: 4 681 564 160 bytes
I 21:35:29 Image Sectors: 2 285 920
I 21:35:31 Operation Successfully Completed! - Duration: 00:00:11
I 21:35:31 Operation Started!
I 21:35:31 Source File: -==/\/[BUILD IMAGE]\/\==-
I 21:35:31 Source File Sectors: 2 285 920 (MODE1/2048)
I 21:35:31 Source File Size: 4 681 564 160 bytes
I 21:35:31 Source File Application Identifier: IMGBURN V2.4.2.0 - THE ULTIMATE IMAGE BURNER!
I 21:35:31 Source File Implementation Identifier: ImgBurn
I 21:35:31 Source File File System(s): ISO9660; UDF (1.02)
I 21:35:31 Destination Device: [1:0:0] HL-DT-ST DVD-RAM GSA-H55N 1.03 (E:) (ATA)
I 21:35:31 Destination Media Type: DVD-RW (Disc ID: TDK502sakuM3) (Speeds: 2x)
I 21:35:31 Destination Media Sectors: 2 297 888
I 21:35:31 Write Mode: DVD
I 21:35:31 Write Type: DAO
I 21:35:31 Write Speed: 2x
I 21:35:31 Link Size: Auto
I 21:35:31 Test Mode: No
I 21:35:31 OPC: No
I 21:35:31 BURN-Proof: Enabled
I 21:35:31 Filling Buffer... (40 MB)
I 21:35:32 Writing LeadIn...
I 21:35:50 Writing Session 1 of 1... (1 Track, LBA: 0 - 2285919)
I 21:35:50 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 2285919)
I 22:03:55 Synchronising Cache...
I 22:04:27 Exporting Graph Data...
I 22:04:27 Graph Data File: C:\Documents and Settings\Admin\Application Data\ImgBurn\Graph Data Files\HL-DT-ST_DVD-RAM_GSA-H55N_1.03_21-ОКТОМВРИ-2008-Г-_21-35_TDK502sakuM3_2x.ibg
I 22:04:27 Export Successfully Completed!
I 22:04:27 Operation Successfully Completed! - Duration: 00:28:56
I 22:04:27 Average Write Rate: 2 713 KB/s (2.0x) - Maximum Write Rate: 2 783 KB/s (2.0x)
I 22:04:27 Cycling Tray before Verify...
W 22:04:37 Waiting for device to become ready...
I 22:05:03 Device Ready!
I 22:05:03 Operation Started!
I 22:05:03 Source Device: [1:0:0] HL-DT-ST DVD-RAM GSA-H55N 1.03 (E:) (ATA)
I 22:05:03 Source Media Type: DVD-RW (Book Type: DVD-RW) (Disc ID: TDK502sakuM3) (Speeds: 2x)
I 22:05:03 Image File: -==/\/[BUILD IMAGE]\/\==-
I 22:05:03 Image File Sectors: 2 285 920 (MODE1/2048)
I 22:05:03 Image File Size: 4 681 564 160 bytes
I 22:05:03 Image File Application Identifier: IMGBURN V2.4.2.0 - THE ULTIMATE IMAGE BURNER!
I 22:05:03 Image File Implementation Identifier: ImgBurn
I 22:05:03 Image File File System(s): ISO9660; UDF (1.02)
I 22:05:03 Read Speed (Data/Audio): MAX / MAX
E 22:05:03 Session 1, Track 1 is smaller on the disc than it is in the image file.
E 22:05:03 Disc's Track Sectors: 0 (TOC Sectors: 0)
E 22:05:03 Image File's Track Sectors: 2285920 (TOC Sectors: 2285920)
E 22:05:10 Operation Failed! - Duration: 00:00:00
I 22:05:10 Average Verify Rate: N/A - Maximum Verify Rate: N/A

#15 Night_Raven

Night_Raven

    Subject Delta

  • Администратори
  • ПипПипПипПипПипПип
  • 22269 мнения
  • Пол:Мъж
  • Живущ в:Rapture (Русе)

Публикувано: 21 October 2008 - 21:52

Хмм, носителят трябва да е доста добър, ако е произведен в Тайван. По някакви причини обаче устройството не го харесва особено. Пробван ли е дискът на друго устройство? Пробва ли да обновиш фърмуеъра от 1.03 до 1.05?

Love is just a chemical, no matter the origin. We give it meaning by choice.

 

- Eleanor Lamb





0 потребители четат тази тема

0 регистрирани потребители, 0 гости и 0 анонимни потребители