Jump to content

Slackware Linux


FLYDERS

Препоръчан пост

Създадох тази темичка, защото мисля, че трябва да се обърне внимание на тази прекрасна линукс дистрибуция. Аз лично тепърва навлизам в света на линукс и мисля ,а също се и надявам, че това ще е мястото където ще се задават въпроси относно Slackware. Надявам се и че ще има кой да отговаря на тези въпроси. ;)

Аз ще започна със първия: Проблемът е следния. Немога да си пусна TV-out -а. Аз съм със видеокарта NVIDIA GeForce FX 5200 (разбира се съм сложил драйвери) , с графична среда KDE 3.4 и Slackware 10.2. Ако може да ми напишете какво трябва да сложа освен драйверите и какво трябва да променя в xorg.conf файла. :help:

Link to comment
Сподели другаде

Ми за тж-оут имаше някаде статия,ма не се сещам.Ма аз питах гоогле и виж кфо ми вика -> http://www.google.bg/search?hl=bg&q=TV...kware&meta=

 

иначе хор пиши в консолата - xorgconf ;D

Link to comment
Сподели другаде

Здравейте отново. Моят въпрос беше знаете ли дали трябва да добавям още нещо освен драйверите за NVIDIA . А относно xorg.conf файла кристално знам каде се намира. Също искам да уточна, че с англииския сме скарани от край време и затова аз търся основно в БГ сайтове. Там съм намерил доста информация за xorg-а. Ето едни промени за TV и монитор. Обърнете внимание на секциите "Device" и "Modules" :

 

Section "Module"
  Load		   "bitmap"
  Load		   "dbe"
  Load		   "ddc"
  Load		   "extmod"
  Load		   "freetype"
  Load		   "glx"
  Load		   "int10"
  Load		   "record"
  Load		   "speedo"
  Load		   "type1"
  Load		   "vbe"
EndSection

Section "InputDevice"
  Identifier	 "Generic Keyboard"
  Driver		 "keyboard"
  Option		 "CoreKeyboard"
  Option		 "XkbRules" "xfree86"
  Option		 "XkbModel" "pc104"
  Option		 "XkbLayout" "us,bg"
  Option		 "XkbVariant" "phonetic"
EndSection

Section "InputDevice"
  Identifier	 "Configured Mouse"
  Driver		 "mouse"
  Option		 "CorePointer"
  Option		 "Device" "/dev/input/mice"
  Option		 "Protocol" "ImPS/2"
  Option		 "Emulate3Buttons" "true"
  Option		 "ZAxisMapping" "4 5"
EndSection

Section "Monitor"
  Identifier "Monitor"
  HorizSync 30.0 - 68.0
  VertRefresh 50.0 - 85.0
  Option "DPMS"
EndSection

Section "Monitor"
  Identifier "Televizor"
  Option "TwinView"
  Option "MetaModes" "1024x768; 800x600"
  Option "SecondMonitorHorizSync" "30-50"
  Option "SecondMonitorVertRefresh" "60"
  Option "TwinViewOrientation" "Clone"
  Option "ConnectedMonitor" "CRT, TV"
  Option "TVStandard" "PAL-B"
  Option "TVOutFormat" "SVIDEO"
#	Option "TVOverScan" "1.0"

EndSection

Section "Device"
  Identifier	 "nvidia0"
  Driver		 "nvidia"
# Edit the BusID with the location of your graphics card
  BusID	   "PCI:1:0:0"
  Screen	  0
EndSection

Section "Device"
  Identifier	 "nvidia1"
  Driver		 "nvidia"
# Edit the BusID with the location of your graphics card
  BusID	   "PCI:1:0:0"
  Screen	  1

EndSection

Section "Screen"
  Identifier	 "Screen0"
  Device		 "nvidia0"
  Monitor		"Monitor"
  DefaultDepth	24
  SubSection	 "Display"
   Depth	   24
   Modes	  "1024x768" "800x600" "640x480"
  EndSubSection
EndSection

Section "Screen"
  Identifier	 "Screen1"
  Device		 "nvidia1"
  Monitor		"Televizor"
  DefaultDepth	24
  SubSection	 "Display"
   Depth	   24
   Modes	  "1024x768" "800x600" "640x480"
  EndSubSection
EndSection

 

Там хората също пишат ,че трябва да се добавят nvtv и tvout . Това незнам какво е. Може би някакви модули. Незнам ,мога само да гадая. Та това ми е основния въпрос.

Link to comment
Сподели другаде

 

Тези всичките неща съм ги взел оттам. Това наистина е един прекрасе сайт, но на въпросите които зададох там няма отговор ( поне невидях ) .

Link to comment
Сподели другаде

Moже да погледнеш ето тук:

http://home.austin.rr.com/unlocked/tvout.html

Виж каква е настройката на XF86Config:

To the Monitor sections:

 

Section "Monitor"

 

Identifier "TV"

 

HorizSync 30-50

VertRefresh 60

 

EndSection

 

That's straight out from the TVOUT_README.

 

To the Screen sections:

 

Section "Screen"

Identifier "Screen_tvout640"

Device "geforce"

Monitor "TV"

DefaultDepth 24

 

# PAL-G for Finland; PAL-D for China and North Korea, see TVOUT_README

Option "TVStandard" "PAL-G"

Option "ConnectedMonitor" "TV"

 

Subsection "Display"

Depth 24

Modes "640x480"

ViewPort 0 0

EndSubsection

EndSection

 

Section "Screen"

Identifier "Screen_tvout800"

Device "geforce"

Monitor "TV"

DefaultDepth 24

 

Option "TVStandard" "PAL-G"

Option "ConnectedMonitor" "TV"

 

Subsection "Display"

Depth 24

Modes "800x600"

ViewPort 0 0

EndSubsection

EndSection

 

And finally to the ServerLayout sections:

 

# monitor

Screen "Screen 1"

# tvout

#Screen "Screen_tvout640"

#Screen "Screen_tvout800"

Link to comment
Сподели другаде

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Гост
Отговори на тази тема

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   Не можете да качите директно снимка. Качете или добавете изображението от линк (URL)

Loading...
×
×
  • Създай ново...